Price to Reshaft Irons If you need a new graphite shaft in your iron , you could be looking at spending anywhere from $40-$100 just for the shaft. Steel, on the other hand, is much more affordable. Depending on the type of steel shaft and the specifications, you are looking at something closer to $20-$75 per shaft.
According to most golfers, it is worth reshafting irons if your iron shaft is damaged, or if the shaft is not suitable for your swing.
How To Re-Shaft Your Steel Golf Clubs Carefully clamp the shaft into a vise using a Shaft Vise Clamp. When removing steel shafts from clubheads, use a torch to heat the hosel. After 30 seconds of heating, with your gloved hands grasp the head and twist/pull the head. Using a wire brush remove excess epoxy from the inside of the hosel.
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs . Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Snag a club-cleaning brush. Wet half a rag in the bucket and leave the other half dry. First, dunk a club in the water , then use the wet half of the rag to wipe the hosel, face and back. Dunk it again and fashion the brush to clean out the grooves, periodically toweling to wipe away excess dirt.
Professional Refinishing Once your club is clean, you may want to give it a fresh new finish. You can expect to pay around $50 per club to get them professionally refinished. This can be a fun way to bring life back into a beloved or special set. However, the cost can be price prohibitive.
If you play 3 or 4 times a month, we recommend you have your clubs re-gripped each year. We stock a wide range of top quality grips from Gold Pride and Eaton and can often supply branded replacements that match the orginal grips fitted to your club .
Generally, this fee will be about $15 to $35 depending on where and when you get the work done. Replacing a shaft on a driver is a bit more work than regripping a club.
There used to be a basic rule for iron shafts – if you’re a strong, competitive player you choose steel, and if you’re older, slower, a woman, or generally not athletic, you choose graphite . Steel shafts were always known as exceptionally consistent while graphite was unpredictable and overly light and flexible.
Ideally, your golf epoxy should have a PSI number of over 2500 PSI. The GolfWorks shafting epoxy is a great option because of its high torque resistance and shear strength.
The results found that golfers typically change their clubs after hitting the four-year milestone – with some even having clubs 10 years after their purchase date! The results are: 7% replace their clubs every 12 months. 2% replace them every 2 years .