A V5 engine is a five-cylinder piston engine where the cylinders share a common crankshaft and are arranged in a V configuration. V5 engine designs are very uncommon, with the only production version of one being the 1997-2006 Volkswagen Group VR5 engine .
For a piston engine to run smoothly, it has to be balanced. That’s why most engines have an even number of cylinders, either arranged straight in a line or split down the middle, each piston balancing out the effect of its twin.
The VR5 engines are a family of gasoline Internal combustion engines developed by the Volkswagen Group and produced from 1997 to 2006. They are derived from the VR6 engine family, also developed by Volkswagen, but with one less cylinder.
The 2.5 VW 5 cylinder engine was essentially the replacement for the older 2.0 liter normally aspirated base model engine . It has a 20 valve cylinder head, with variable valve timing. The 5 cylinder configuraton is known for better torque and smoother revving operation than a 4 cylinder .
A V24 engine is a 24-cylinder piston engine where two banks of twelve cylinders are arranged in a V configuration around a common crankshaft. The majority of V24 engines , however, have been “dual V12” engines where two separate V12 engines are placed in line with each other.
Amongst four- stroke engines, an advantage of engines with five or more cylinders is that the power strokes are overlapping (if the engine has an even firing order). This means that two cylinders are undergoing their power stroke at any given time, which reduces pulsations in the power output.
Here are six vehicles currently for sale on Autotrader that use 5 – cylinder engines . 2010 Chevrolet Colorado — $15,995. 2010 Volkswagen Jetta — $8,000. 1998 Volvo V70 — $2,900. 2012 Audi TT RS — $30,900. 2009 Hummer H3T — $23,995. 1996 Acura 2.5 TL — $3,297.
1. SRT Viper: 8.4-liter, 640-hp and 600 lb-ft V-10 . The biggest engine available in the U.S. belongs to an American supercar — and all remains right in the world. The Viper’s 8.4- liter V-10 makes an impressive 640 hp and 600 lb-ft of torque.
A straight-seven engine or inline-seven engine is a straight engine with seven cylinders . Wärtsilä also produces regular trunk engines in this configuration. It is more common in marine applications because marine engines are usually based on a modular design, with individual heads per cylinder .
VW’s familiar 2.5-liter 5 – cylinder engine has been standard equipment in many gasoline-fueled variants of the Jetta and Passat sedans, along with Beetle hatchbacks and convertibles.
Treat it like you should , it will last you till 200,000 or more. I’ve had and know of a few VW’s that hit that easily. No matter what car you have there is no grantee it will last . Best you can do under any circumstance is maintain it properly.
The Pros and Cons of Inline 5 Cylinder Engines – The most significant advantage of Inline 5 engines is that they offer a smooth power delivery compared to an Inline 4. This is due to the straight-fives 36 degrees of overlap, as well as the vertical balance of the engine .
shared between the two brands though. VW owns Audi , Porsche, Skoda, Seat. Engines on the lower line Audi’s have the same engines as the VWs. Same with the Golf/A3 platforms.